The electrical trainers we offer in our heavy truck section focus on networking, charging, starting, and lighting. The CAN Bus trainer works on the J1939 CAN network that all heavy trucks use. This trainer is great in that it is small and allows students to see how all parts of a truck communicate over the network. This trainer is a trainer the students have to wire themselves giving them a more hands on training exercise. The trainer is designed with students in mind. There are safeties in place that if a student wires something wrong it won’t destroy the train (like if they put a power lead to a ground test point).
The HD lighting trainer is a lighting trainer that is based on a truck’s system. With this trainer, you are able to build your own OEM lighting system and see how it operates. This helps students understand principles of electronics much easier.
24SI Diesel Charging Trainer
- Simulates Charging System and Operation
- Includes Alternator, Drive Motor, Battery, and Controls
- Includes Remote Sense Functionality and faults
- Five(5) Real World Faults for Diagnosis
- Test Points for Diagnosis and Troubleshooting
- Optional Optima vs regular battery
- Dimensions: 40″l x 31″w x 10″d
- Stand is optional
- Weight: 180 lbs (approx)
35SI Charging System Trainer w/ Faults
- Simulates Charging System and Operation
- Includes Alternator, Drive Motor, Battery, and Controls
- Includes Remote Sense Functionality and faults
- Five(5) Real World Faults for Diagnosis
- Test Points for Diagnosis and Troubleshooting
- Optional Optima vs regular battery
- Dimensions: 40″l x 31″w x 10″d
- Stand is optional
- Weight: 180 lbs (approx)
CAN Networking Trainer
- Provides students the ability to wire a CAN Bus system with jumper wires
- Has 4 individual modules — Input, Output, ECM, and Murphy Display (Instrument Cluster), to communicate through the CAN (J1939) network
- Input switches are sent from different modules to the output module via the CAN network. With the CAN networking, you can see the factory data packets on the CAN lines
- 12 faults to allow the student’s test system with real-world symptoms
- Trainer powered by a single 12v DC 20 amp power supply that requires 120v AC to operate
- The front of the table has an analog volt and amp meter to display system power
- Panels are interchangeable with our HD Lighting Trainer to allow for expansion capabilities
- Panels mounted on a single-sided or optional double-sided frame (for 2 students).
DIESEL ELECTRICAL TRAINERS
Home / Heavy Truck Trainers / Diesel Electrical Trainers
The electrical trainers we offer in our heavy truck section focus networking, charging, starting, and lighting. The CAN Bus trainer works on the J1939 CAN network that all heavy trucks use. This trainer is great in that it is small and allows students to see how all parts of a truck communicate over the network. This trainer is a trainer the students have to wire themselves giving them a more hands on training exercise. The trainer is designed with students in mind. There are safeties in place that if a student wires something wrong it won’t destroy the train (like if they put a power lead to a ground test point).
The HD lighting trainer is a lighting trainer that is based off of a trucks system. With this trainer you are able to build your own OEM lighting system and see how it operates. This helps students understand principles of electronics much easier.
24SI Diesel Charging Trainer
- Simulates Charging System and Operation
- Includes Alternator, Drive Motor, Battery, and Controls
- Includes Remote Sense Functionality and faults
- Five(5) Real World Faults for Diagnosis
- Test Points for Diagnosis and Troubleshooting
- Optional Optima vs regular battery
- Dimensions: 40″l x 31″w x 10″d
- Stand is optional
- Weight: 180 lbs (approx)
35SI Charging System Trainer w/ Faults
- Simulates Charging System and Operation
- Includes Alternator, Drive Motor, Battery, and Controls
- Includes Remote Sense Functionality and faults
- Five(5) Real World Faults for Diagnosis
- Test Points for Diagnosis and Troubleshooting
- Optional Optima vs regular battery
- Dimensions: 40″l x 31″w x 10″d
- Stand is optional
- Weight: 180 lbs (approx)
- Provides students the ability to wire a CAN Bus system with jumper wires
- Has 4 individual modules — Input, Output, ECM, Murphy Display (Instrument Cluster), to communicate through the CAN (J1939) network
- Inputs switches are sent from different modules to the output module via the CAN network. With the CAN networking you can see the factory data packets on the CAN lines
- 12 faults to allow the students test system with real world symptoms
- Trainer powered by a single 12v DC 20 amp power supply that requires 120v AC to operate
- Front of the table has an analog volt and amp meter to display system power
- Panels are interchangeable with our HD Lighting Trainer to allow for expansion capabilities
- Panels mounted on a single sided or optional double sided frame (for 2 students).
- Allows students to understand, build, and wire circuits
- Multiple system components for full range of experimentation
- Includes lighting, solenoids, flashers, switches and resistance
- Printed board allows students to trace circuit paths
- 100+ Real world faults available
Freightliner Electrical Trainer
Heavy Duty Lighting Trainer
- Allows students to understand, build, and diagnose lighting circuits
- Complete truck lighting system on modular circuit panels
- Includes front lighting, rear lighting, control panel, and daytime running lamps
- Optional single sided vs double sided
- Real world faults are included for student diagnosis
NaviStar International Electrical Series
- Complete diesel electrical system: Engine, starting, charging, body, lighting, accessories
- Units can link together for joint system or stand-alone operation
- Real World Faults for diagnosis
- Diagnostic connectors for scan tool testing
- Included factory service information, wiring diagrams, and courseware
Inquire now for pricing, information, and availability
